Skip to product information
1 of 12

DoubleTake Mirror

DoubleTake Enduro Mirror Kit - Short Arm and DoubleTake Ball Base (Pair)

DoubleTake Enduro Mirror Kit - Short Arm and DoubleTake Ball Base (Pair)

SKU:DTM-M-201-A-B-v.2

Regular price $239.00 NZD
Regular price Sale price $239.00 NZD
Sale Sold out
Tax included. Shipping calculated at checkout.
View full details

DoubleTake Enduro Mirror Kit with RAM Double Socket Arm and DoubleTake Ball Base (Pair)


* Indestructible- Made from reinforced Zytel
* Excellent visibility- SAE spec convex lens
* Easy to fold, remove, or swap between bikes
* Housing guaranteed against breakage
* RAM 60 mm short double socket arm gives maximum adjust-ability
* DoubleTake M10 x 1.25 Male Thread Ball Base included
* Compatible with the majority of bikes, including all Honda, Kawasaki, KTM, Triumph, Husqvarna, Zero and Suzuki bikes, and left side of Yamaha
* Made in the USA


This kit is designed to replace your factory mirrors. The ball base screws into the mirror post base on most bikes (see note below). Recommended for applications where mirror will be folded down often.

Mirror Dimensions
Diameter = 100mm (4")
Length = 215mm (8.5")



Compatibility:
Threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch
Compatible with the majority of bikes, including all Honda, Kawasaki, KTM, Triumph, Husqvarna, Zero and Suzuki bikes, and left side of Yamaha (you need a reverse thread adaptor for the right side and an adaptor for the left to keep things level if desired)

DoubleTake base Thread Pitch:
M10-1.25 x 7/16"


Arm Dimensions:
Overall: 60.5mm (2.38")
Socket-To-Socket: 51mm (2")


Components:
DTM-A 2 x DoubleTake Adventure Mirror
RAM-B-201U-A 2 x hort DBL Socket Arm
DTM-B 2 x DoubleTake 1" Ball Base

YouTube:
https://www.youtube.com/watch?v=C8mDODfi2_o&list=TLGGzK26BgaN84kwMjA5MjAyMQ
https://www.youtube.com/watch?v=9OdChYlKTWQ&list=TLGGqEM5kehrThcwMjA5MjAyMQ

Note: The right-hand mirrors on certain models of Yamaha, Beta, and certain KTM bikes may require a reverse thread adaptor. Some models (WR250s) are factory equipped with a reverse thread adapter. Please verify if your specific bike is equipped with the reverse thread adaptor on the right side before ordering.

Note: We stock reverse thread and other adaptors where required.

Note: Riders with BMW's (and others) that use an M8 x 1.25 thread might consider substituting the RAM-B-349U base with the RAM-B-367U - get in touch if you need to do this ($3 extra)- either that or add the DTM-BMW adaptor base