RAM Radar Detector Mount - Suction Cup Base - Long Arm

RAM-B-166-C-300U – RAM® Power Plate™ III Radar Detector Mount with Suction Cup Base (Long Arm)

The RAM-B-166-C-300U holds a radar detector on your windscreen using RAM's magnetic Power Plate™ III, a twist-lock suction cup base and a long double socket arm for extra reach. The magnet lets you twist the detector off when you park, and the suction base moves between vehicles in seconds. This is the long-arm version; a medium-arm (RAM-B-166-300U) and a short-arm (RAM-B-166-A-300U) are also available.

Key Features

• Magnetic Power Plate™ III holds the detector with two rare earth magnets and an adhesive steel plate; twist to remove
• RAM® Twist-Lock™ suction base grips glass and other smooth, non-porous surfaces, including RAM adhesive disks
• Long double socket arm gives extra reach from the glass; ball-and-socket design allows near-infinite positioning
• Larger plate than the Power Plate II, so it suits bigger detectors
• Powder-coated marine-grade aluminium and high-strength composite; backed by a lifetime warranty

Works With

Any radar detector with a 102mm x 76mm (4" x 3") flat bottom surface. Mounts to windscreens, glass and other smooth, non-porous surfaces.

Dimensions & Specifications

• Power Plate size: 79.5mm x 101.6mm (3.13" x 4")
• Adhesive steel plate: 50mm x 38mm x 0.08mm
• Suction cup: 83.8mm (3.3") diameter twist-lock
• Arm overall length: 152mm (6"); socket-to-socket 134mm (5.25")
• Ball size: B size, 1" rubber ball
• Materials: powder-coated marine-grade aluminium, high-strength composite

Compatible Devices

Any radar detector with a 102mm x 76mm (4" x 3") flat bottom surface, including:

• Beltronics GT-7
• Cobra ESD 7570
• Escort iX, Max 360, Passport S55, Solo S4
• Radenso XP
• Uniden R3
• Valentine One V1

What's Included

• RAP-300-1U Power Plate™ III magnetic detector holder
• RAM-B-224-1U 83.8mm (3.3") twist-lock suction base with 1" ball
• RAM-B-201U-C long double socket arm
• RAM-B-202U 63mm round base with 1" ball
• Hardware: adhesive steel plate, two rare earth magnets, four #6-32 x 1/2" machine screws, four #6-32 Nylock nuts

FAQs

Will the magnet harm my device? Don't use the magnetic holder with any device containing an internal hard drive, as the magnet may damage the drive.

Which arm length should I choose? This is the long (152mm) arm. For a closer mount choose the medium-arm RAM-B-166-300U or the short-arm RAM-B-166-A-300U.

How fast does it ship? Items shown in stock will normally be shipped from our Auckland warehouse in 1 business day. For out of stock items please enquire.

Videos

RAM Power Plate III suction mount overview