RAM Tab-Tite Cradle - 9.7" - 10" Tablets incl. iPad 1-4 with light duty case

RAM-HOL-TAB3U RAM® Tab-Tite™ Cradle for 9.7"–10" Tablets

The RAM-HOL-TAB3U is RAM® Mounts' spring-loaded Tab-Tite™ cradle for 9.7" to 10" tablets without a heavy case, built around the Apple iPad Gen 1-4. It grips the tablet top and bottom with quick-release end cups and bolts onto any RAM® component with the standard AMPS hole pattern. This listing is the cradle on its own, ready to pair with the RAM® ball base and arm of your choice.

Key Features

• Spring-loaded grip: secures the iPad Gen 1-4 and similar 9.7"–10" tablets, with one-handed load and release.
• Interchangeable end cups: swap the cups to re-fit the cradle when you upgrade devices rather than buying a whole new holder.
• Universal AMPS pattern: the back plate carries the 4-hole AMPS pattern and takes B-size (1") and C-size (1.5") RAM® round ball bases for near-infinite ball-and-socket adjustment.
• Built to last: high-strength composite construction for vibration resistance in demanding environments, backed by RAM®'s lifetime warranty.

Works With

The cradle bolts to any RAM® base, arm or plate that uses the universal AMPS hole pattern, and the back plate accepts both B-size (1") and C-size (1.5") round ball bases. Fit is determined by the tablet's measured size, so check your device against the cradle dimensions below.

Compatible Devices

9.7"–10" tablets including:

Apple

• iPad (1st Generation)
• iPad (2nd Generation)
• iPad (3rd Generation)
• iPad (4th Generation)

ASUS

• MeMO Pad FHD 10
• Transformer Pad

Dell

• Venue 10 7000
• Venue 11 Pro 7000

HP

• ElitePad 900
• ElitePad 900 G1
• Pro 610

Lenovo

• S6000
• Tab A10
• ThinkPad 10
• Yoga Tablet 10
• Yoga Tablet 10 HD+
• Yoga Tablet 2 (10 inch)

Plus any tablet that fits within the cradle dimensions below.

Dimensions & Specifications

• Cradle height range: 216–283mm (8.5"–11.125")
• Cradle width range: 162–197mm (6.38"–7.75")
• Cradle depth range: 3.3–14.2mm (0.13"–0.56")
• Hole pattern: 4-Hole AMPS, 1.181" x 1.496" (30mm x 38mm)
• Material: high-strength composite
• Weight: 249g (0.55 lb)

What's Included

• RAM® Tab-Tite™ spring-loaded cradle (back plate and end cups)
• Assembly hardware: (4) #8-32 x 5/8" machine screws, (4) #8-32 x 1/2" machine screws, (4) #8-32 Nylock nuts

Replacement end cups for this cradle are available here: RAM-HOL-TAB3-CUPSU end cups.

FAQs

Does this come with a mount or base? No. The RAM-HOL-TAB3U is the cradle only. To complete a mount you add a RAM® ball base (B or C size) and a double socket arm. If you'd rather buy it ready to go, see our TAB3 cradle with a C-series ball base built in.

Will my tablet fit? If your tablet sits within the height, width and depth ranges above, it will fit. This cradle suits tablets without a heavy-duty case.

Can I reuse it when I upgrade my tablet? Often, yes. The end cups are interchangeable, so a new pair of cups can re-fit the same back plate to a different device.

How fast does it ship? Items shown in stock will normally be shipped from our Auckland warehouse in 1 business day. For out of stock items please enquire.

Videos

Watch the RAM® Tab-Tite™ overview on YouTube