RAM Tab-Tite Cradle - Panasonic Toughpad - Dual Suction Cup Base - Articulating

RAM-B-189-PIV1-TAB10-ALA1-KRU RAM® Tab-Tite™ Articulating Suction Mount for Panasonic Toughpad FZ-A1

The RAM-B-189-PIV1-TAB10-ALA1-KRU is a complete RAM® mount for the Panasonic Toughpad FZ-A1 and similar rugged tablets. It pairs the spring-loaded RAM® Tab-Tite™ cradle with the RAM® dual articulating Twist-Lock™ suction base and a retention-knob arm, built to seal on curved surfaces and hold steady through vibration.

Key Features

• Dual articulating suction base: two 84mm (3.3") cups pivot independently, so the base grips curved glass and surfaces, not just flat ones.
• Retention-knob arm: the double socket arm has an extension knob, so you can re-aim it with the tablet loaded and it will not over-loosen.
• Spring-loaded Tab-Tite cradle: holds the tablet with interchangeable end cups for access to ports.
• Infinite adjustment: B-size 1" ball at each end of the arm for near-infinite viewing angles.
• Built to last: powder-coated steel, marine-grade aluminium and high-strength composite; lifetime warranty on the mount hardware, with the suction cups excluded as a wear item.

Works With

Sized for the Panasonic Toughpad FZ-A1 and similar rugged tablets within the cradle dimensions below. The Tab-Tite™ cradle takes any tablet inside those ranges, so measure your device with its case fitted rather than going by model name. The pivot base suits curved or flat smooth, non-porous surfaces.

Compatible Devices

• Dell Latitude 5285
• HP Pro X2 612
• Panasonic Toughpad FZ-A1
• Microsoft Surface Pro 4 in Incipio case (requires RAM-HOL-TAB-RISER2U when used with the hand strap)

Plus any tablet that fits within the cradle dimensions below.

Dimensions & Specifications

• Cradle height range: 247–305mm (9.75"–12")
• Cradle width range: 162–219mm (6.38"–8.62")
• Cradle depth range: 3.3–25.4mm (0.13"–1")
• Suction base: two 83.8mm (3.3") independently articulating cups, 202mm (7.95") total span
• Ball size: B Series 1"
• Arm: double socket arm with retention knob, 94mm (3.69") overall, 76mm (3") socket-to-socket
• Load capacity: 907g (2 lb) standard use, 454g (1 lb) heavy-duty use
• Material: powder-coated steel, marine-grade aluminium and high-strength composite
• Weight: 925g (2.04 lb)

What's Included

• RAM® Tab-Tite™ spring-loaded cradle (back plate and end cups)
• RAM® dual articulating Twist-Lock™ suction base with 1" ball
• RAM® double socket arm with retention knob
• Round base adapter with 1" ball
• Assembly hardware

Care & Warranty

• Smooth, non-porous surfaces only; anything rough or textured lets air past the seal and the cups will not hold.
• Clean the surface thoroughly before you apply the cups.
• If the vehicle is left sitting in extreme heat or cold, release the cups and stow the mount rather than leaving it loaded.
• RAM® classes suction cups as a general wear item, so the cups are excluded from warranty cover. The base, arm and cradle hardware are covered as normal.

Videos

Watch the RAM® articulating suction mount on YouTube

FAQs

Why an articulating base? Each suction cup pivots on its own, so the base can sit flat against a curved windscreen where a rigid dual base could not seal.

Does it fit a Surface Pro 4? Yes, in an Incipio case. If a hand strap is fitted, add the RAM-HOL-TAB-RISER2U.

Are the suction cups covered by the warranty? No. RAM® treat suction cups as a general wear item, so they sit outside the lifetime warranty. The rest of the mount hardware is covered as normal.

When will my order ship? If this item shows as being in stock then it will usually ship from our Auckland warehouse in 1 business day. If it says to enquire then please get in touch as we may be able to get this back in for you.