RAM-B-201U-C-UN8-400U – RAM® X-Grip® 7-8" Tablet Mobility Mount with Tough-Claw™ and Twin Long Arms
The RAM-B-201U-C-UN8-400U is a complete mobility mount pairing the RAM® X-Grip® universal cradle for 7-8" tablets with a small Tough-Claw™ clamp base and two long RAM® double socket arms. The twin-arm setup gives maximum reach and adjustability to set the ideal viewing position on a wheelchair or other mobility device, and the Tough-Claw™ clamps tool-free to the bars without tools.
Key Features
- Spring-loaded X-Grip design with rubber caps and rear quick-release grip knobs holds most 7-8" tablets securely; includes an optional device tether for rugged use
- Tough-Claw™ small clamp base installs tool-free on rails and bars from 15.9mm to 29mm (0.625" to 1.14") in outer diameter, or flat surfaces up to 29mm (1.14") thick
- Two long RAM® double socket arms (152mm each) give maximum reach and near-infinite angle adjustment for comfortable viewing on a mobility device
- Constructed from marine-grade aluminium, high-strength composite, and stainless steel hardware
- Backed by a lifetime warranty
What's Included
- RAP-B-400U small Tough-Claw™ base with 1" ball
- 2 × RAM-B-201U-C long double socket arm
- RAM-B-230U 1" ball adapter
- RAM-HOL-UN8BU X-Grip® universal 7-8" tablet cradle
Dimensions & Specifications
- Rail/tube clamping range: 15.9mm to 29mm (0.625" to 1.14") outer diameter
- Flat surface clamping range: 0mm to 29mm (1.14") thick
- Arm length: 152mm (6") overall, 134mm (5.25") socket-to-socket (each arm)
- Weight capacity: 907g (2 lb) standard use, 454g (1 lb) heavy-duty use
- Cradle minimum device width: 63.5mm (2.5") — requires minimum device height 177.8mm (7")
- Cradle maximum device width: 146mm (5.75") — requires minimum device height 101.6mm (4")
- Cradle maximum device depth: 22.2mm (0.875")
Compatible Devices
Fits 7-8" tablets within the cradle dimensions above, with or without a case. For the full list of compatible models, see our RAM-HOL-UN8BU listing.
Videos
FAQs
Is this a complete mount? Yes. The Tough-Claw base, both long arms, the ball adapter that joins them and the X-Grip tablet cradle are all included — there's nothing else to buy.
Will the Tough-Claw fit my wheelchair frame? It clamps tool-free to round, square and odd-shaped tubing from 15.9mm to 29mm outer diameter, and to flat surfaces up to 29mm thick. Most wheelchair armrest tubes, frame rails and walker bars sit inside that range — measure yours before ordering.
Will my tablet fit with a case on? Measure the width of your tablet with the case, sleeve or skin fitted. The cradle opens from 63.5mm to 146mm wide and takes devices up to 22.2mm thick.
Is the tether included? Yes. It's worth fitting on a mobility device that gets moved in and out of vehicles or over rough ground — it's cheap insurance if the tablet is ever knocked loose.
How much reach do the twin arms give? The two 152mm arms join through the RAM-B-230U ball adapter, so the tablet can be swung well clear of the frame and folded back out of the way when it isn't needed. Each ball joint loosens by hand, so the position can be reset without tools.
How much weight will it hold? Up to 907g (2 lb) in standard use, or 454g (1 lb) where the mount sees constant vibration or rough handling. Most 7-8" tablets sit comfortably inside that.
Shipping: If this item shows as being in stock then it will usually ship from our Auckland warehouse in 1 business day. If it says to enquire then please get in touch as we may be able to get this back in for you.
