RAM Tab-Tite Cradle - 10" Tablets including iPad Pro 9.7 with Case with C Series Ball

RAM-HOL-TAB8-202U RAM® Tab-Tite™ Cradle for 10" Tablets with C-Series Ball

The RAM-HOL-TAB8-202U is the RAM® Tab-Tite™ spring-loaded cradle for 10" tablets with a case, supplied with a C-size 1.5" round ball base already fitted. Sized around the Apple iPad Pro 9.7 (1st Gen) in a case, it gives you the cradle and the ball in one part, ready to join to any C-size double socket arm for a full mount.

Key Features

• Cradle and ball in one: the spring-loaded Tab-Tite™ cradle ships on a C-size 1.5" round ball base, so you only need to add a C-size arm and a base to finish the job.
• Spring-loaded grip: holds 9.7" to 10.5" tablets with or without a case, with one-handed load and release.
• Interchangeable end cups: re-fit the cradle to a new device with a fresh pair of cups instead of replacing the whole holder.
• Built to last: high-strength composite cradle on a powder-coated, marine-grade aluminium round base, backed by RAM®'s lifetime warranty.

Works With

The included C-size 1.5" ball pairs with any RAM® C-size double socket arm. Fit is determined by the tablet's measured size, so check your device against the cradle dimensions below.

Compatible Devices

Apple

• iPad Pro 9.7 (1st Gen) with or without case
• iPad (9th Gen) 10.2" with or without case

Plus any tablet that fits within the cradle dimensions below.

Dimensions & Specifications

• Cradle height range: 229–292mm (9"–11.5")
• Cradle width range: 162–211mm (6.38"–8.31")
• Cradle depth range: 3.3–28mm (0.13"–1.12")
• Ball size: C Series 1.5"
• Hole pattern: 4-Hole AMPS, 1.181" x 1.496" (30mm x 38mm)
• Material: high-strength composite cradle, powder-coated marine-grade aluminium round base
• Weight: 395g (0.87 lb)

What's Included

• RAM® Tab-Tite™ spring-loaded cradle (back plate and end cups)
• C-size 1.5" round ball base
• Assembly hardware: (4) #8-32 x 5/8" machine screws, (4) #8-32 x 1/2" machine screws, (4) #8-32 Nylock nuts

Replacement end cups for this cradle are available here: RAM-HOL-TAB8-CUPSU end cups.

FAQs

Is this a complete mount? Almost. You get the cradle and a C-size 1.5" ball base. To finish, add a C-size double socket arm and a second C-size base for your vehicle or surface.

B series or C series, which do I need? The C-size 1.5" ball used here is the larger, heavier-duty option and suits 10" tablets on the move. If you want the lighter 1" ball, see the RAM-HOL-TAB8-B-202U.

Will my tablet fit? If your tablet in its case sits within the height, width and depth ranges above, it will fit.

How fast does it ship? Items shown in stock will normally be shipped from our Auckland warehouse in 1 business day. For out of stock items please enquire.

Videos

Watch the RAM® Tab-Tite™ overview on YouTube