RAM-B-189-TAB3U RAM® Tab-Tite™ Dual Suction Mount for 9.7-10" Tablets
The RAM-B-189-TAB3U is a complete RAM® dual suction cup mount for 9.7" to 10" tablets, built around the Apple iPad Gen 1-4. Two RAM® Twist-Lock™ suction cups give a stronger, more vibration-resistant hold than a single cup, paired with the spring-loaded RAM® Tab-Tite™ cradle and a medium B-size arm.
Key Features
-
Dual Twist-Lock suction base: two 84mm (3.3") cups grip glass and smooth, non-porous surfaces, built for places where a single cup would shake loose.
-
Complete mount: cradle, dual suction base and arm in one kit.
-
Spring-loaded Tab-Tite cradle: holds the tablet top and bottom with interchangeable end cups.
-
Infinite adjustment: B-size 1" ball at each end of the double socket arm, locked with a single knob.
-
Built to last: powder-coated marine-grade aluminium, stainless steel components and high-strength composite; lifetime warranty on the mount hardware, with the suction cups excluded as a wear item.
Works With
Built for the iPad Gen 1-4 and similar 9.7"–10" tablets without a heavy case, within the cradle dimensions below. The Tab-Tite™ cradle takes any tablet inside those ranges, so measure your device rather than going by model name. Mounts to windscreens, glass and other smooth, non-porous surfaces.
Compatible Devices
9.7"–10" tablets including:
Apple
- iPad (1st Generation)
- iPad (2nd Generation)
- iPad (3rd Generation)
- iPad (4th Generation)
ASUS
- MeMO Pad FHD 10
- Transformer Pad
Dell
- Venue 10 7000
- Venue 11 Pro 7000
HP
- ElitePad 900
- ElitePad 900 G1
- Pro 610
Lenovo
- S6000
- Tab A10
- ThinkPad 10
- Yoga Tablet 10
- Yoga Tablet 10 HD+
- Yoga Tablet 2 (10 inch)
Plus any tablet that fits within the cradle dimensions below.
Dimensions & Specifications
-
Cradle height range: 216–283mm (8.5"–11.125")
-
Cradle width range: 162–197mm (6.38"–7.75")
-
Cradle depth range: 3.3–14.2mm (0.13"–0.56")
-
Suction cups: two, 83.8mm (3.3") each; total width 202mm (7.95")
-
Ball size: B Series 1"
-
Arm length: 94mm (3.69") overall, 76mm (3") socket-to-socket
-
Load rating: 907g (2 lb) standard use, 454g (1 lb) heavy-duty use
-
Hole pattern: 4-Hole AMPS, 1.181" x 1.496" (30mm x 38mm)
-
Material: powder-coated marine-grade aluminium, stainless steel and high-strength composite
-
Weight: 821g (1.81 lb)
What's Included
- RAM® Tab-Tite™ spring-loaded cradle (back plate and end cups)
- RAM® Twist-Lock™ dual suction cup base with 1" ball
- RAM® medium double socket arm
- Round base adapter with 1" ball
- Assembly hardware
Care & Warranty
- Smooth, non-porous surfaces only; anything rough or textured lets air past the seal and the cups will not hold.
- Clean the surface thoroughly before you apply the cups.
- If the vehicle is left sitting in extreme heat or cold, release the cups and stow the mount rather than leaving it loaded.
- RAM® classes suction cups as a general wear item, so the cups are excluded from warranty cover. The base, arm and cradle hardware are covered as normal.
Videos
Watch the RAM® Tab-Tite™ overview on YouTube
FAQs
How is this different from the single-cup suction mount? It uses two suction cups for a stronger, more vibration-resistant hold.
Will my tablet fit? If your tablet sits within the cradle ranges above, it will fit. This cradle suits tablets without a heavy-duty case, for a cased 10" tablet, the RAM-B-189-TAB8U has the deeper cradle.
Are the suction cups covered by the warranty? No. RAM® treat suction cups as a general wear item, so they sit outside the lifetime warranty. The rest of the mount hardware is covered as normal.
When will my order ship? If this item shows as being in stock then it will usually ship from our Auckland warehouse in 1 business day. If it says to enquire then please get in touch as we may be able to get this back in for you.
