RAM Tab-Tite Cradle for 10.1" - 10.5" Tablets with or without Case

RAM-HOL-TAB33U RAM® Tab-Tite™ Cradle for 10.1"-10.5" Tablets

The RAM-HOL-TAB33U is a spring-loaded RAM® Tab-Tite™ cradle that holds 10.1" to 10.5" tablets with or without a light-duty case. It's built for the Samsung Galaxy Tab S6 Lite, A7 10.4, S5e and A 10.1, plus the Lenovo K10, and bolts to any RAM® base with the universal AMPS hole pattern. We use Tab-Tite cradles ourselves on bikes, boats and farm gear, so we know they hold.

Key Features

• Spring-loaded, quick-release hold: pull the top cups apart, drop the tablet in, let go
• Interchangeable end cups, so you can re-fit the cradle to a new tablet later instead of buying a whole new mount
• Open cups leave your buttons, ports and cameras accessible while mounted
• 4-hole AMPS backplate fits any RAM® round ball base for a double socket arm
• High-strength composite construction, backed by RAM Mounts' lifetime warranty

Works With

This is the cradle only. The AMPS backplate accepts any RAM® round ball base (B-size 1" or C-size 1.5"), which then pairs with a matching double socket arm to mount on your vehicle or surface. Bases and arms are sold separately. If you'd rather buy it ready to mount, we also stock this cradle with a 1" ball base or with a 1.5" ball base.

Compatible Devices

Lenovo

• K10 Tablet with or without case

Samsung

• Galaxy Tab A 10.1 (2016) with or without case
• Galaxy Tab A7 10.4 with or without case
• Galaxy Tab A8 10.5 with case
• Galaxy Tab S5e with or without case
• Galaxy Tab S6 Lite with or without case

Any 10.1-10.5" tablet that fits within the dimensions below will work. Measure your device in its case before ordering.

Dimensions & Specifications

• Fits devices (in their case) within: height 242.6 to 299.7mm (9.55" to 11.8"), width 139.7 to 176.5mm (5.5" to 6.95"), depth 5.1 to 16.8mm (0.2" to 0.66")
• Hole pattern: 4-hole AMPS, 1.181" x 1.496" (30mm x 38mm)
• Material: high-strength composite

What's Included

• 1 x RAM® Tab-Tite™ cradle (backplate with TAB33 end cups fitted)
• Mounting hardware: 4 x #8-32 x 5/8" machine screws, 4 x #8-32 x 1/2" machine screws, 4 x #8-32 Nylock nuts

For off-road or open-cockpit use we'd recommend a tether as cheap insurance against vibration.

FAQs

Does it include a mount or arm? No, this is the cradle only. You add a RAM® ball base and double socket arm to suit your vehicle, or buy one of the ball-base combos linked above.

Can I re-use it on a different tablet later? Yes. Swap the end cups (RAM-HOL-TAB33-CUPSU) for a different size rather than replacing the whole cradle.

Will my tablet fit? If it sits within the height, width and depth ranges above (measured in its case), it'll fit.

Videos

Watch the RAM® Tab-Tite™ assembly video

Items shown in stock will normally be shipped from our Auckland warehouse in 1 business day. For out of stock items please enquire.