Sena TUFFTALK-LITE2 Hard Hat Mount Earmuff

TUFFTALK-LITE2-02 Sena Tufftalk Lite2 - Hard Hat Mount Earmuff

The Sena Tufftalk Lite2 (hard hat mount version) is a Bluetooth communication earmuff that clips into the accessory slots on a hard hat, pairing 22dB of hearing protection with a four-way intercom that reaches 800m and runs for 13 hours. Workers talk hands-free, take calls and listen to music or FM radio without removing their hearing protection. It is the current-generation Tufftalk Lite and lifts the hard hat mount Noise Reduction Rating from 20dB to 22dB.

Key Features

• Hard hat mount design fits the standard slots on most site hard hats
• Four-way Bluetooth intercom conference: talk with up to 3 other workers over 800m in open terrain
• Noise Reduction Rating of 22dB, up from 20dB on the first-generation hard hat mount Tufftalk Lite, with a CSA Class B rating and an SNR of 27dB under EN352-3
• Up to 13 hours of talk time from a full 2.5 hour charge, and the headset can be used while charging
• HD-quality 32mm speakers with Advanced Noise Control on the boom microphone for clear audio in loud environments
• Bluetooth 4.1 Class 1 pairs with two phones at once for calls, music and voice assistant access
• Group Intercom, Universal Intercom for non-Sena headsets, VOX hands-free activation and Audio Multitasking
• Built-in FM radio with RDS AF and 10 station presets
• Set up through the free Sena Industrial smartphone app: settings, speed dial presets and radio presets

Works With

The same headset is available as the Tufftalk Lite2 over-the-head version (TUFFTALK-LITE2-01) if your crew does not wear hard hats. If you need longer intercom reach, swappable batteries or ambient mode, step up to the Sena Tufftalk (TUFFTALK-01), which runs to 1.4km with the optional long antenna and offers 24dB attenuation.

Dimensions & Specifications

• Mounting: hard hat accessory slot mount
• Headset dimensions: 170mm x 195mm x 95mm (6.7" x 7.7" x 3.7")
• Weight: 354g (12.5oz)
• Hearing protection: NRR 22dB (ANSI S3.19-1974), CSA Class B, SNR 27dB (EN352-3)
• Intercom: four-way conference (you plus 3 others), pairing list of 3, 800m working range in open terrain
• Bluetooth: 4.1, RF Power Class 1, with HSP, HFP, A2DP, AVRCP and AGHFP profiles
• Talk time: up to 13 hours
• Battery: 750mAh lithium polymer, non-removable, 2.5 hour charge via USB Type-C
• Speakers: 32mm driver units, 7.1mm thick, 32 ohm, 20Hz to 20,000Hz, SBC codec, sample rate to 48kHz
• Microphone: 160mm uni-directional condenser boom, 100Hz to 10,000Hz, Advanced Noise Control
• FM radio: RDS AF, 76MHz to 108MHz, 10 station presets with automatic scan
• Operating and storage temperature: -20°C to 55°C; charging temperature 0°C to 45°C
• Certifications: CE, FCC, IC, KC
• App and firmware: Sena Industrial app for iOS and Android; Sena Device Manager for firmware updates

Care & Warranty

Sena covers the Tufftalk Lite2 with a two-year manufacturer warranty from the date of purchase. Ear pads, ear pad foams and microphone sponges are wear items and are not covered; get in touch and we can sort replacements for you. Wipe the cups and mounting arms down with a damp cloth rather than solvents, keep the USB-C port clear of site dust, and top the battery up every few months if the headset is going into storage.

FAQs

Will it fit my hard hat? It mounts into the standard side accessory slots found on most site hard hats. If you are running an unusual brand or a helmet without slots, send us the model and we will check before you order.

How is the Lite2 different from the original Tufftalk Lite? The hard hat mount Lite2 lifts the Noise Reduction Rating from 20dB to 22dB. The core electronics are unchanged: Bluetooth 4.1, four-way intercom to 800m, 13 hour talk time, HD speakers and built-in FM radio.

Is this a Mesh headset? No. The Tufftalk Lite2 uses Bluetooth intercom rather than Sena Mesh, and there is no ambient mode or active noise cancellation. Get in touch if you need Mesh for a larger or more mobile crew and we will point you at the right unit.

Can I swap the battery on a long shift? No. The 750mAh battery is built in and is not user-replaceable, and the Lite2 does not take AAA cells. You can keep working while it charges over USB-C, and a full charge takes 2.5 hours for 13 hours of talk time. If your crews need hot-swappable power, look at the original Tufftalk instead.

Shipping: If this item shows as being in stock then it will usually be dispatched within 1 business day of your order. If it says to enquire then please get in touch as we may be able to get this back in for you.