RAM Tab-Tite Cradle - Panasonic FZ-G2 & FZ-A3

RAM-HOL-TAB34U RAM® Tab-Tite™ Cradle for Panasonic FZ-G2 & FZ-A3

The RAM-HOL-TAB34U is a spring-loaded RAM® Tab-Tite™ cradle built for the Panasonic Toughbook FZ-G2 and FZ-A3 rugged tablets, and it also fits the Getac UX10. It bolts to any RAM® base with the universal AMPS hole pattern, so you can mount a rugged tablet in a work vehicle, machine cab or field workstation and still pull it out in a second.

Key Features

• Spring-loaded, quick-release hold sized for the Panasonic FZ-G2, FZ-A3 and Getac UX10
• Interchangeable end cups, so you can re-fit the cradle to a new device later
• Open cups keep buttons, ports and cameras accessible while mounted
• 4-hole AMPS backplate fits any RAM® round ball base for a double socket arm
• High-strength composite construction, backed by RAM Mounts' lifetime warranty

Works With

This is the cradle only. The AMPS backplate accepts any RAM® round ball base (B-size 1" or C-size 1.5"), which then pairs with a matching double socket arm to mount on your vehicle or surface. Bases and arms are sold separately. Replacement cup ends are available as RAM-HOL-TAB34-CUPSU.

Compatible Devices

Getac

• UX10 (note: the Thunderbolt port is blocked while mounted, and the cradle won't fit the UX10's extended battery or carrying handle)

Panasonic

• Toughbook FZ-G2
• Toughbook FZ-A3

Any rugged tablet that fits within the dimensions below will work. Measure your device in its case before ordering.

Dimensions & Specifications

• Fits devices (in their case) within: height 266.7 to 317.5mm (10.5" to 12.5"), width 187.7 to 200.2mm (7.39" to 7.88"), depth 25.4 to 31.8mm (1" to 1.25")
• Hole pattern: 4-hole AMPS, 1.181" x 1.496" (30mm x 38mm)
• Material: high-strength composite
• Weight: 254 grams (0.56 lb)

What's Included

• 1 x RAM® Tab-Tite™ cradle (backplate with TAB34 end cups fitted)
• Mounting hardware: 4 x #8-32 x 5/8" machine screws, 4 x #8-32 x 1/2" machine screws, 4 x #8-32 Nylock nuts

For off-road or open-cockpit use we'd recommend a tether as cheap insurance against vibration.

FAQs

Does it include a mount or arm? No, this is the cradle only. You add a RAM® ball base and double socket arm to suit your vehicle or workstation.

Does it fit the Getac UX10? Yes, with two caveats: the Thunderbolt port is covered while mounted, and it won't accommodate the UX10's extended battery or carrying handle.

Can I re-use it on a different device later? Swap the end cups (RAM-HOL-TAB34-CUPSU) rather than replacing the whole cradle.

Videos

Watch the RAM® Tab-Tite™ assembly video

Items shown in stock will normally be shipped from our Auckland warehouse in 1 business day. For out of stock items please enquire.